How to add and reset Eva Logik Smart Plug on Hubitat Elevation hub

Authored by: Support.com Tech Pro Team

1. Introduction

How to add and reset Eva Logik products on Hubitat Elevation hub

2. Resolution

Factory Reset

1. Hold the button for 5 seconds when powered on

Join the Z-Wave Network

1. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
2. Press the button on the switch 3 times within 2 seconds.

Exclusion from the Z-Wave Network

1. From the device's details page, select Remove Device, then Remove
2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
3. Press the Top button on the switch 3 times within 2 seconds.

Device

Product Number

Device Type

Protocol

Smart Plug

ZW36

Outlet

Z-Wave Plus

Device

Product Number

Device Type

Protocol

Smart Plug

ZW37

Outlet

Z-Wave Plus

Factory Reset

1. Hold the button for 10 seconds when powered on

Join the Z-Wave Network

1. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
2. Press the button on the switch 3 times within 2 seconds.

Exclusion from the Z-Wave Network

1. From the device's details page, select Remove Device, then Remove
2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
3. Press the Top button on the switch 3 times within 2 seconds.

Device

Product Number

Device Type

Protocol

Smart Plug

ZW39

Dimmer

Z-Wave Plus

Factory Reset

1. Press and hold the top button for at least 3 seconds while you plug the smart switch into a receptacle

Join the Z-Wave Network

1. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Inclusion on the Device Discovery page.
2. Press the button on the switch 3 times within 2 seconds.

Exclusion from the Z-Wave Network

1. From the device's details page, select Remove Device, then Remove
2. From the Hubitat Web Interface home page, select Z-Wave, then Start Z-Wave Exclusion on the Device Discovery page.
3. Press the button on the switch 3 times within 2 seconds.