How to Connect a Sony Smart TV to WiFi

Authored by: Support.com Tech Pro Team

1. Credentials

In order to connect to a wireless network, you must have the required credentials. These are:

Wireless Network Name (SSID)
Wireless Network Key (Password)

Finding Network Credentials

Most wireless routers/gateways have a label with the default credentials. If the credentials aren't there, look in the devices documentation.

Default Wi-Fi credentials highlighted on router/gateway sticker.

If your Internet Service Provider (ISP) installed the wireless router or gateway, they might have left you a setup sheet which may have the credentials.

2. Connect to Wi-Fi

Press the Home button on your remote.

Select Settings.
Select Network.

Settings menu with network setup highlighted

Select Network Setup.

Select Set up network connection.

Network setup with set up network connection highlighted

Select Auto.

Network setup with auto and custom options

Select Wireless LAN.

Select NO to scan for a nearby wireless network.

Select your network from the list.

Enter your Wi-Fi password.

Press Enter on your remote to quit the network setup.

Select Refresh Internet Content to verify connection.

Network screen with refresh internet content highlighted

Your TV is now connected to your Wi-Fi.

3. Check Other Devices

To help troubleshoot the problem we should check if other devices can connect to the wireless network.

4. Check Environment

If other wireless devices are connected to the network and functioning properly, chances are the router is OK. It's possible there is an environmental issue. Do you have a portable wireless device (Smart Phone, Tablet, Laptop, etc.) that you can put in the same area to test and see if that device's wireless connection still functions as intended in that location?

5. Power cycle

If you haven't already, please try power cycling the device you're working with. To do so, simply turn it off, wait 30 seconds and turn it back on again.

6. What's next?

7. Range Check

The device needs to be within a reasonable range of the router in order to connect and have the best connection speeds.

In general, in most homes, you can be up to 30 feet from your router for a decent connection.
From 30' to 50' away, the speeds will be slower, and may drop occasionally, but it should be usable.
Greater than 50' away, and the signal will most likely be too weak to overcome interference. The speeds will be slow, and the connection may be sporadic.

The above numbers are approximates only. Optimal range may vary based on router make and model.

8. What's next?

9. Relocate Router Check

Your router may need to be relocated to a more centralized location in order to provide better coverage for all your devices.

Good Placement

A house, separated into rooms detailing how placing Wi-Fi in the center of a house will provide better coverage to reach all devices. Diagram.

Bad Placement

A house, separated into rooms detailing how placing Wi-Fi in the corner of the house can cause some devices to not have a Wi-Fi signal. Diagram.

10. Router Relocation

Since this appears to be a range issue that can be resolved by putting the router in closer proximity to the device's intended use area, we recommend moving the router to a more centralized location.

11. Range Extender

If wireless signal is not reaching your device, and relocating your router or the device itself to be in closer proximity is not possible or doesn't resolve the issue, a great way to boost wireless signal without replacing existing equipment is to acquire and install a range extender. Range extenders work with your existing wireless router as a type of wireless repeater used to expand the reach of wireless signal in your home.