The Polar M600 watch is sporty and has a wide variety of features. Some of these features include GPS, assistance on the go, heart rate monitoring, and playing music during workouts.
This guide will walk you though the pairing process to link to your mobile device.
2. Enable Bluetooth
Swipe down on your screen (or up, if using a tablet) to access the menu.
Hold down on the Bluetooth icon to bring up Bluetooth options.
Ensure the Bluetooth switch is set to ON.
3. Install Android App
Open Play Store.
Type "Android Wear" in the search bar and select Android Wear - Smartwatch.
Tap Install to start downloading the app.
Once installed, tap Open to proceed to the setup.
4. Pairing and Sync
When you open the Android Wear app on your phone it will automatically prompts you to start setting up your watch.
Swipe left on your M600 to see the Bluetooth verification code, and tap the same code on your phone.
Make sure the pairing code on your M600 matches with the pairing code on your phone, and tap Pair.
You’ll see a quick confirmation message on both the M600 and your phone when the pairing is completed. After that, it takes a while for the M600 to finish syncing with your phone. The smartwatch will open to the time view once the sync is done.
You need to turn on watch notifications so that your phone can send updates to your watch. Follow the onscreen instructions on your phone to do this. If you have used the Android Wear app before with another device, you may have already allowed notifications for the app. You can check this in your phone's settings.
5. Enable Bluetooth
Open Settings on your phone or tablet.
Then tap Bluetooth.
Make sure Bluetooth is set to On.
6. Install iOS App
Open the App Store.
Type in "Android Wear" in the search bar.
Find Android Wear in the search results and tap on GET.
.png)
