How to Set Up a LG BP-350 BluRay Player

Authored by: Support.com Tech Pro Team

1. Introduction

This guide will walk you though the basic setup of your LG BP-350 blu-ray player.

2. Connect Cables

1. Plug the power cord into the Blu-Ray player and into a power source.
   

1. Plug the HDMI cable from the box to the TV.
   

3. Insert Battery

Remove the cover off of the remote and insert a AAA battery. Be sure to match the positive (+) and negative (-) symbols.

4. Initial Setup

Use the remote as needed in the following steps.

1. Press the Power button.
2. Use the arrows to select your language.
   

1. After reading the terms of service, highlight Agree and press the Enter button.
2. Highlight Start and press the Enter button.
   

1. Use the up and down arrows to highlight your wireless network and then press the Enter button.
   

1. Use the arrows to enter your wireless security key. Once your security key is entered, highlight Ok and hit the Enter button.
   

1. Use the arrows to highlight Dynamic IP, then highlight Next and hit the Enter button.
   

1. Highlight OK and press the Enter button to finish setup.
   

1. Highlight Finish and hit the Enter button.
   

5. Set Resolution

Use the remote for the following steps.

1. Press the Home button.
2. Use the left and right arrows to highlight settings and press the Enter button.
   

1. Use the up and down arrows to select Display and press the right arrow button.
2. Use the up and down arrows to highlight Resolution and press the Enter button.
   

1. Use the up and down arrows to highlight the resolution you want and then press the Enter button.
   

6. Connect Wi-Fi

Use the remote for the following steps.

1. Press the Home button.
2. Use the left and right arrows to highlight settings and press the Enter button.
   

1. Press the Enter button when the Start button is highlighted.
   

1. Use the up and down arrows to highlight your wireless network and then press the Enter button.
   

1. Enter your wireless security key and then highlight Ok and then hit the Enter button.
   

1. Use the arrows to highlight Dynamic IP, then highlight Next and hit the Enter button.
   

1. Highlight OK and press the Enter button to finish setup.