Using Heyday wireless headphones is straightforward. Follow these steps to get started:
Charge the Headphones:
Ensure the Heyday wireless headphones are fully charged using the included charging cable.
Connect the cable to a power source and let the headphones charge until the battery indicator shows a full charge.
Power On the Headphones:
Press and hold the power button on the headphones until the LED light turns on, indicating the headphones are powered on.
Enable Pairing Mode:
If the headphones do not enter pairing mode automatically, press and hold the power button until the LED light flashes.
Connect to Your Device:
Open the Bluetooth settings on your device (smartphone, tablet, or computer).
Ensure Bluetooth is turned on and search for available devices.
Select “Heyday Headphones” from the list to pair.
Confirm Connection:
Once paired, you will hear a confirmation tone or message in the headphones.
The LED light will stop flashing and remain solid, indicating a successful connection.
Using Controls:
Use the buttons on the headphones to control playback, volume, and answer calls.
Refer to the user manual for specific control functions.
Recharging the Headphones:
When the battery is low, connect the headphones to a power source using the included charging cable.
The LED light will indicate charging status.
Maintaining the Headphones:
Clean the headphones regularly and store them in a safe place when not in use.
Avoid exposing the headphones to extreme temperatures or moisture.
Contact Support.Com
If you are still having trouble, refer to the Step-By-Step Guide below, or Contact Support.Com for Personalized Assistance.
1. Introduction
The Heyday Wireless Headphones are really easy to use. In this guide we will present the layout of the control buttons and connectivity ports, the meanings of the indicator light and sound indicator patterns, how to charge the headphones' battery and how to connect them over Bluetooth to other devices.
What You'll Need:
No extra tools or supplies are needed.
-->
Before You Begin:
Extra instructions.
hyperlink
-->
2. Using the Headphones
Get to Know the Buttons and PortsBelow is an overview of the layout of the control buttons and connectivity ports of the Heyday Wireless Headphones:
Indicator Light
Charging Port
Auxiliary Port
Volume Down Button
Press and release
Decrease volume
Press and hold
Jump to previous track
Mute while on a call
Volume Up Button
Press and release
Increase volume
Press and hold
Jump to next track
Power Button
Press and release
Play or pause music
Answer or hang up a call
Press and hold
Turn headphones on or off
Get to Know the Indicator Light Meanings
Knowing what the patterns of the indicator light mean can help you understand what the status of the headphones is at any time.
Flashing Red and White
Headphones are in pairing mode, waiting to connect to a new device.
Flashing White Twice
Headphones are connected to a device. Stops flashing after three cycles.
Flashing Red
Battery is low on headphones and will need to be charged soon to continue using them.
Solid Red
Headphones' battery is charging.
Light Off
Headphones' battery charging is complete.
Get to Know the Indicator Sound Meanings
In addition to seeing the indicator light patterns you will also hear different sound patterns coming from the headphones to give you feedback when you operate them. The sound indicators are as follows:
Ascending / Descending Tones: Headphones are being turned on / off.
Quick Ascending / Descending Tone: Headphones have reached max / min sound volume.
Three Rapid Tones: Headphones are in pairing mode, waiting to connect to a new device.
Single Chime: Headphones are connected to a device.
Two Rapid Dings: Battery is low on headphones and will need to be charged soon to continue using them.
Learn How to Charge the Battery
The Heyday Wireless Headphones run on a battery which needs to be charged periodically. Charging it can take between 1.5 to 2.5 hours and is very simple to do:
Connect one end of the charging cable into to the left earcup of the headphones.
Connect the other end of the cable into a computer or USB power adapter.
Leave the headphones charging until the red indicator light turns off.
Learn How to Connect the Headphones over Bluetooth
With the headphones turned off, press and hold the Power Button on the right earcup for seven seconds.
The headphones will go into pairing mode. The Indicator Light on the left earcup will flash rapidly red and white and you'll hear three rapid tones in the headphones.
Switch to your other device and connect it HEYDAY HEADPHONE 01 over Bluetooth.
Once the connection is successful, the Indicator Light on the headphones will flash twice rapidly and you'll hear a chime in the headphones.
If you need in-depth instructions We have another guide available with more detailed instructions on how to connect the headphones over Bluetooth:
.png)
